Compare(0/4) X Clear All
HOME >Support >DEEBOT N79
What types of floor can DEEBOT clean?
DEEBOT is capable of cleaning nearly all floors, including bare floors and short-pile carpets. DEEBOT is not suitable for use on long-pile or shag carpets.
When should I use the Main Brush Option and the Direct Suction Option?
The Main Brush Option is the best choice for deep cleaning with a combination of the agitator brush and strong suction. The Direct Suction Option, activated when the agitator brush is removed, is specifically designed to pick up pet and human hair without tangling.
Can DEEBOT really clean under my furniture?
DEEBOT’s low-profile design gives it the ability to clean under furniture without complications. You can find the dimensions in the instruction manual.
What does DEEBOT do if it meets an obstacle, like furniture?
DEEBOT has an active obstacle detection system to help it avoid contact with your furniture, walls and household items. Anti-Collision Sensors are built into the robot. When the sensors detect an obstacle, a signal will be sent to DEEBOT’s “brain” to slow down, change direction and select a new cleaning path. If the object is very low to the ground, 1.5” or smaller in height, DEEBOT may gently touch the obstacle with its mechanical cushion bumper before turning around.
DEEBOT is not cleaning along edges and in corners thoroughly. What should I do?
Please choose Edge Cleaning Mode to clean along edges and in corners effectively.
Why does DEEBOT spill dust when I move the robot manually?
If dust is spilling when you move DEEBOT by hand, the Dust Bin is probably too full. The Dust Bin should be emptied regularly for best cleaning performance. When moving DEEBOT manually, please lift the robot with both hands and keep the end marked “DEEBOT” tilted slightly up to avoid spillage.
Can DEEBOT be used to vacuum up water?
No. Do not allow DEEBOT to ingest liquid as it will damage the unit.
What should be done if DEEBOT accidentally vacuums up liquid?
Turn OFF the robot immediately. Remove the Dust Bin, Filters, Main Brush and suction component and allow them to dry completely before reinstalling them.
If the robot does not function normally after taking these steps, please contact Customer Service.
The Main Brush is tangled with hair and debris. How do I clean it?
Power OFF the robot and turn it over. Remove the Main Brush Cover and the Main Brush. Use the Multi-Function Cleaning Tool to cut off and remove any hair tangled around the Main Brush. The Main Brush can be rinsed under water, however it should be dried completely before being reinstalled into the DEEBOT. The Direct Suction Option is recommended for cleaning up human and pet hair without tangling.
Why does dirt from DEEBOT 's Dust Bin leak out?
There is too much dirt in the Dust Bin. Please empty the Dust Bin regularly for best performance.
Will DEEBOT disturb my pet?
Normally, no. DEEBOT works quietly and the noise should not upset your pets. We recommend that you supervise DEEBOT during its first cleaning and assist should there be a problem.
Can DEEBOT clean when nobody is home?
Yes, you can schedule DEEBOT to automatically clean once or twice per day, even if no one is at home.
Where should I place the Charging Dock so DEEBOT can easily find it?
The Charging Dock should be plugged in and placed against a wall. Place the Charging Dock on a level floor surface with the base perpendicular to the ground. Keep the immediate area 1.5m /5’ in front of the charger and 0.5m /2’ at both sides of the Charging Dock clear of objects and reflective surfaces that may interfere with the infrared receiver.
Is it dangerous to touch DEEBOT’s Charging Contacts or the Charging Pins on the Charging Dock?
No. The maximum DC voltage output of the Charging Dock is within the safe range for the human body.
Can I keep DEEBOT on the Charging Dock for an extended period of time?
Yes. After DEEBOT’s batteries are fully charged, the battery management system will reduce electricity to a trickle charge and DEEBOT will not be overcharged. We recommend keeping DEEBOT powered ON and on the Charging Dock so it is ready to clean at any time
Do you have any Remote Control tips?
When your DEEBOT is on a scheduled cleaning, or you have used your remote to start an edge cleaning, or a spot cleaning, you need to first click PAUSE on the remote to regain control of your DEEBOT. Once you click pause, then all the buttons on the remote will work again. Your remote might not look exactly like the one below, but you get the idea...
How can I make sure my Deebot is ON?
The master on/off switch needs to be ON to charge. To remember its schedule, to use the remote, and to clean.  The switch can be a tad confusing.  The "|" is ON... the "O" is OFF.  Just leave it ON, and your DEEBOT will be happy.
What should I be careful of when charging the battery?
Be sure to remove the water tank before charging the battery.
Make sure the charging dock is power sufficient
The floors are wet when it mops, could this be dangerous?
Our products are built with technology to spread water evenly when mopping. They never leave sizable puddles of water, and should not present a danger.
Thank you for your attention!