Reservoir does not drain
Updated on 2023/03/10
1. Check that the reservoir and the cleaning pad plate are installed. After installing the cleaning pad plate, a voice prompt will inform you that the cleaning pad plate is installed. If there is no prompt:
1) Check that the cleaning pad plate is securely in place.
2) Check to see whether the small magnet has come off.
2. Restart the robot and check if water is coming out of the three water outlets on the underside of the robot after 10 seconds. If water does not come out, wipe the water outlets on the bottom of the robot with a cloth to prevent impurities from clogging the outlet.
1) Check that the cleaning pad plate is securely in place.
2) Check to see whether the small magnet has come off.
2. Restart the robot and check if water is coming out of the three water outlets on the underside of the robot after 10 seconds. If water does not come out, wipe the water outlets on the bottom of the robot with a cloth to prevent impurities from clogging the outlet.