What should I do if no clean water flows into the cleaning sink?

Updated on 2023/02/17
1. Open the top cover of the station and take out the clean water tank.
1) Check whether there is any foreign object between the clean water tank and the station, if so, please clean it.
2) Check whether the sealing plug for the clean water tank in the station is properly installed. If not, please re-install it.
2. Check whether there is any foreign object in the water outlet, if yes, please clean it.
3. Check whether the water inlet filter in the clean water tank is too dirty after using for a while. If so, please clean it and put it back to the original place after cleaning.
Was this article helpful?