App prompts that the robot is disconnected from the station. Or the station cannot control the robot.

Updated on 2024/03/08
DEEBOT is disconnected from the base station or the base station cannot control the DEEBOT:

1. Disconnect the base station from the power supply and remove the DEEBOT cover, power off DEEBOT (switch to "O" ) and wait for 5~10 seconds.
2. Reconnect the power supply to the base station and make sure the light on the base station panel is on.
3. Power on the DEEBOT again (switch to "I"), and make sure you hear the power on tone.
4. Hold the Auto Start button on the body of DEEBOT to let it automatically return to the base station (or manually push the tail end of DEEBOT to the base station cleaning sink) to ensure that the DEEBOT is correctly docked and the charging contacts are properly aligned. Wait for about 10~15S, tap the Start/Pause button on the station to try.
Was this article helpful?
Rates from 0–36% APR. Payment options through Affirm are subject to an eligibility check and are provided by these lending partners: affirm.com/lenders. Options depend on your purchase amount, and a down payment may be required. CA residents: Loans by Affirm Loan Services, LLC are made or arranged pursuant to a California Finance Lenders Law license. For licenses and disclosures, see affirm.com/licenses. For example, a $800 purchase could be split into 12 monthly payments of $72.21 at 15% APR or 4 interest free payments of $200 every 2 weeks.