WINBOT W1 PRO

The First ECOVACS Cross Auto-spray WINBOT
Does the mopping pad have to be wrung? What is an acceptable level of moisture?Do I need to differentiate between the front and back of the mopping pad? Can both sides be used for cleaning?Why are there water marks on the glass after cleaning?Can the reminder about the water reservoir need to be filled with Ecovacs cleaning solution or clean water before using the robot be turned off?If there is too much dust on the glass, do I have to remove the dust before using WINBOT?
005731_8674-WINBOTW1PRO_Bottom
FAQ
  • FAQ
  • Download
  • Tutorial Videos
  • Accessories
  • FAQ
  • Download
  • Tutorial Videos
  • Accessories
Does the mopping pad have to be wrung? What is an acceptable level of moisture?
Do I need to differentiate between the front and back of the mopping pad? Can both sides be used for cleaning?
Why are there water marks on the glass after cleaning?
Can the reminder about the water reservoir need to be filled with Ecovacs cleaning solution or clean water before using the robot be turned off?
If there is too much dust on the glass, do I have to remove the dust before using WINBOT?
Why are W1 PRO's safety tether and power cord attached to the robot?
What is the W1 PRO water spray angle? What is the water spray interval?
Does WINBOT W1/W1 PRO have an increase in walking speed compared to W920?
What should I do if WINBOT slips (sliding sideways or shuddering)?
What is the service life of the mopping pad?
What should I do if WINBOT reminds
How many sprays are in a 60 ml water tank? How big a house area can it serve?
WINBOT reports that the driving thread is stuck.
Will the suction power decrease when the robot is unplugged?
WINBOT does not spray water.
The drving threads clean itself during the use of the product. Where does the dust on the drving threads go after cleaning?
How to clean the glass of the shower room? Should I wait for it to dry completely before cleaning?
How to clean the self-cleaning brush of the drving threads?
Does WINBOT use tap water or purified water? What will happen if purified water is used?
After the WINBOT sprays water, there are occasionally droplets on the robot, which will converge and fall.
Can I use WINBOT on rainy days?
What is the walking route of WINBOT?
What is the maximum effective distance for the App remote control?
What is the default startup mode of WINBOT? How many back and forth cleaning sessions will be performed? How long will it take?
Are there any requirements on the tilt angle of the glass?
What is continous cleaning?
Can I use WINBOT outdoors in northern winter with a low temperature?
WINBOT has a low battery level and is connected to the power cord for charging. A while later, all the indicators are off. What is the status of the robot?
Can I charge WINBOT without powering it on (with the power switch on 0)?
Which button do I need to press to start the robot?

Instruction Manuals

WINBOT WI PRO-EN,FR-CA,ES-LA.pdf
download
How to use WINBOT W1 PRO_Basic Guide
How to use WINBOT W1 PRO_Maintenance